Skip to content
Dubai's first fully integrated RV route is live. Camping parks, service stations, and rest stops now run from Hatta's mountain trails to the Gulf coast, with licensed RV parks across public and private land, a unified RTA travel permit covering all seven Emirates, and a community of UAE road travellers that has been waiting for exactly this infrastructure.
If you are building, fitting out, or upgrading a space within this ecosystem, whether that is an RV interior, a mobile home, a rest stop bathroom, or a campsite amenity block, this guide is for you. Specifically, it is about the surfaces that matter most in these environments and the wall panels in Dubai that VOX Furniture UAE supplies to finish them properly.
The Challenges Are Different Here
Finishing the interior of a mobile home or a rest stop facility is not the same problem as renovating a standard apartment. The materials you choose have to do more, in harder conditions, with less room for error.
Weight is a real constraint in mobile structures
Every kilogram added to an RV or caravan affects fuel consumption, load ratings, and handling. Traditional wall boarding, plasterboard, and heavy composite panels are not viable options. The finishing material needs to be genuinely lightweight without looking cheap.
Moisture management is non-negotiable
RV bathrooms and rest stop shower facilities operate in confined, high-humidity environments with daily or near-constant water exposure. Grout lines in a compact wet room accumulate mould and bacteria quickly, and in a public facility cleaning time between users is a real operational cost. Waterproof, grout-free surfaces are a functional requirement, not a design preference.
Surfaces take harder, more varied contact than in a residential setting
Rest stop corridors see luggage, trolleys, and high foot traffic throughout the day. RV interiors see the vibration and movement of road travel. Materials need to hold their finish under conditions that would visibly wear a standard decorative panel within months.
Downtime is expensive
Whether you are a rest stop operator who cannot close a facility during renovation, or an RV owner who cannot park a vehicle for three weeks while a builder works inside it, the renovation approach has to be fast and non-disruptive. This rules out anything that requires demolition, structural work, or extended drying and curing time.
VOX wall panels address all four of these constraints directly, which is why wall panels in Dubai outdoor hospitality and mobile living projects increasingly specify VOX as the finishing material of choice.
Matching the Right Panel to the Right Space
The Wet Room: Idevo for RVs, SPC by VILO for Larger Facilities
The bathroom is where the wrong material causes the most damage, and where the right one makes the biggest practical difference.
In a compact RV or mobile home wet room, Idevo is the correct specification. Each panel measures 110 cm wide by 280 cm tall at just 0.5 cm thick. That 0.5 cm matters in a space where every centimeter of clearance counts. A single panel runs floor to ceiling with no horizontal join, and in a typical RV shower enclosure, two panels cover all four walls in a single installation session. The material is 100% waterproof Stone Polymer Composite with a tongue-and-groove connection between panels that seals the joins. No grouting. No finishing profiles. No surfaces where moisture can penetrate and accumulate. Installation is adhesive directly onto fiberglass, ply, or composite boarding, with no structural preparation.
For rest stop bathrooms and campsite shower facilities serving multiple users daily, SPC Wall Panels by VILO are the stronger choice. These come in a 120 cm x 60 cm format at 4 mm thick, delivering the visual weight of natural marble or stone in a rigid, completely waterproof body rated to 10J impact resistance. In a public facility where cleaning happens multiple times per day, the absence of grout lines is not a minor convenience: it is the difference between a two-minute wipe-down and a scrubbing job. All colorways are UV-resistant for facilities with glazed walls or skylights. Available in Calcutta White, Calcutta Black, Ash Grey Marble, and Concrete Beige.
View Calacatta White View Calacatta Black
Browse SPC Wall Panels
The Living and Sleeping Area: Linerio for Character, Soform for Comfort
The interior living space of an RV or mobile home is where the finish determines whether the space feels like a considered living environment or a converted vehicle. The difference is significant for anyone spending multiple consecutive nights on the road.
Linerio fluted slat panels are the starting point for any RV or mobile home living area. At 1.7 kg per panel, they add negligible weight to the structure. Each panel spans 3.05 metres in a single length with no horizontal join, and the slat profile introduces depth and texture that a flat painted wall simply cannot achieve in a compact space. The warm wood colourways, natural oak, mocca, and chocolate, work particularly well in confined interiors where the goal is to make the space feel grounded and inviting rather than industrial. Panels install with adhesive, can be cut on-site with a handsaw, and are ready to use immediately with no curing period.
There is also a practical acoustic benefit that matters more in a mobile structure than anywhere else: Linerio's slat profile absorbs reverberation and echo. Metal-framed interiors are naturally reflective, and road noise, engine vibration, and campsite ambient sound all transmit readily through hard surfaces. Linerio reduces that reflection meaningfully, which adds up over a long journey or a multi-night stay.
For the sleeping area specifically, Soform upholstered panels take the acoustic benefit further. Built on a 5 mm HDF board with 25 mm foam upholstery, these panels absorb sound at the wall surface rather than reflecting it back into the room. A Soform-panelled sleeping wall in an RV or mobile home produces a measurably quieter environment, which translates directly into the quality of rest after a long day of travel.
Soform's installation method is also uniquely suited to mobile applications: panels attach with high-strength double-sided Velcro tape rather than adhesive. There is no drilling and no permanent bonding to the vehicle's wall substrate, which means they tolerate the natural flexion of a structure in transit without delaminating, and they can be reconfigured or removed cleanly if the interior layout changes. At under 0.6 kg per panel, they add almost nothing to the vehicle's load. Available in wide rectangular (30x60 cm), tall narrow (15x60 cm), and geometric hexagonal (30x35 cm) formats in Sand Matt, Black Velvet Matt, Mustard Velvet, and Pink Melange finishes.
View Sand Matt Rectangular View Black Velvet Tall
Browse Soform Upholstered Panels
Entrances, Corridors, and High-Traffic Zones: MPC by VILO
Rest stop reception areas, campsite entrance corridors, and communal facility halls see a different category of daily wear than any residential interior. Luggage contact, cleaning equipment, foot traffic, and outdoor dust tracked in on shoes all degrade standard decorative panels within a short operating period.
MPC, Mineral Polymer Composite, is the specification for these zones. It carries higher hardness and mechanical resistance than polystyrene-based panels, holding its finish under repeated impact that would visibly mark a lighter material. The range includes a flat XL wide-format panel for seamless coverage and slatted S and M profiles for surfaces where the fluted aesthetic is preferred. Flat and slatted formats can be combined in a single installation, and moisture resistance is built into the material for areas near washrooms or outdoor entry points.
For rest stop operators building facilities that need to perform across years of high daily traffic without visible deterioration, MPC is the only specification in the VOX range with the material density to deliver that.
Get in Touch
Dubai's outdoor hospitality infrastructure is growing quickly. The rest stops, campsites, and mobile living spaces that invest in quality finishes now are the ones that will define the standard for the sector.
If you are working on an RV fit-out, a campsite facility builds, or a rest stop renovation, bring your plans to us. Our team will match the right wall panels in Dubai to each space, give you a clear materials list, and get your order moving without delay.
Explore the full wall panel range
WhatsApp / Call: +971 50 833 5751 Email: customercare@voxfurniture.ae Showroom: Dubai Festival Plaza, Jebel Ali, Dubai Design your space in 3D with VOXBOX
Frequently Asked Questions
Will adhesive-installed panels hold in a vehicle that is regularly in transit?
Linerio is the best specification for walls in a moving vehicle. Its lightweight polystyrene construction and adhesive bond flex slightly with the natural movement of a mobile structure rather than cracking or pulling away from the substrate. Soform is the most movement-tolerant option of all, since it attaches with Velcro tape rather than adhesive and has no rigid bond to the wall surface at any point. Idevo and SPC are rigid panels best suited to fixed installations: permanently sited mobile homes, rest stop structures, and campsite facilities rather than vehicles in regular road transit.
How do VOX panels handle the UAE's heat, particularly in a parked vehicle?
Idevo and SPC are rated for the humidity and temperature variation typical of a UAE interior, including the cycling of air conditioning in desert-heat conditions. Linerio's polystyrene core is thermally stable across standard interior temperature ranges. For vehicles that park in direct sun for extended periods without air conditioning running, we recommend discussing the specific application with our team before ordering.
How quickly can an RV or mobile home interior be finished?
A compact RV wet room with Idevo typically takes one working session. A living area feature wall in Linerio takes two to four hours. A full interior fit-out of a standard-size mobile home across all surfaces is generally a two-day project. Soform can be self-installed by the vehicle owner with no specialist tools and no installation experience required.
Can I install these panels myself?
Linerio and Soform are both designed for self-installation. Linerio requires construction adhesive and a handsaw or jigsaw for cutting; Soform requires only the Velcro tape supplied. Idevo and SPC benefit from professional installation, particularly in wet rooms where watertight performance depends on correct adhesive coverage and panel alignment. Our professional installation team operates across all seven Emirates, and upon purchase our installers can train your own contractors or build crew on correct technique for any panel system if you prefer to keep the work in-house.
What are the cleaning requirements for a rest stop or campsite facility?
Idevo and SPC wipe clean with a damp cloth and standard household cleaner. No grout means no lines to scrub and no porous surfaces where bacteria accumulate between uses. Linerio and MPC clean with a soft damp cloth or a light vacuum along the slat channels. Soform fabric panels are spot-cleaned with a dry or lightly damp cloth.
Can I view the panels at full scale before committing to a project order?
Yes. Our showroom at Dubai Festival Plaza, Jebel Ali, displays all five systems at full scale. For rest stop developers, campsite operators, and RV park investors planning larger installations, we recommend visiting with floor plans and dimensions. Our team will provide per-area product recommendations, a full materials estimate, and a project quote. Our free 3D planning tool, VOXBOX, for visualising panel combinations in your specific layout before ordering.
What are the delivery and payment terms?
In-stock items reach Dubai and Abu Dhabi in three to five working days. Professional installation is available across all seven Emirates. Delivery and installation are included on orders above AED 2,500. Payment in instalments is available through Tabby and Tamara.
